Canon 3818B001, 500D manual 169

wPrinting

5Set the date and file number imprinting.

Set as necessary.

Select <I>, then press <0>.

Set as desired, then press <0>.

6Set the number of copies.

Set as necessary.

Select <R>, then press <0>.

Set the number of copies, then press <0>.

7Start printing.

Select [Print], then press <0>.

XThe <l> button’s blue lamp will blink and the printing will start.

With Easy printing, you can print another image with the same settings. Just select the image and press the <l> button lit in blue. With Easy printing, the number of copies will always be 1. (You cannot set the number of copies.) Also, any trimming (p.171) will not be applied.

The [Default] setting for printing effects and other options are the printer’s own default settings as set by the printer’s manufacturer. See the printer’s instruction manual to find out what the [Default] settings are. Depending on the image’s file size and image-recording quality, it may take some time for the printing to start after you select [Print].

If image tilt correction (p.171) has been applied, it will take longer to print the image.

To stop the printing, press <0> while [Stop] is displayed, then select [OK]. If you execute [Clear all camera settings] (p.136), all the settings will revert to the default.

169