Error Codes

Error No. If there is a problem with the camera, an error message will appear. Follow the on- screen instructions.

Countermeasures

No.

Error Message & Solution

 

Communications between the camera and lens is faulty. Clean the

01

lens contacts.

 

ÎClean the electrical contacts on the camera and lens and use a

 

 

Canon lens. (p.13, 16)

 

 

 

Card cannot be accessed. Reinsert/change card or format card

02

with camera.

 

ÎRemove and install the card again, replace the card, or format the

 

 

card (p.31, 40).

 

 

 

Cannot save images because card is full. Replace card.

04

 

ÎReplace the card, erase unnecessary images, or format the card

 

(p.31, 159, 40).

 

 

 

The built-in flash could not be raised. Turn the camera off and on

05

again.

 

ÎPower switch operation (p.27).

 

 

06

Sensor cleaning is not possible. Turn the camera off and on again.

 

ÎPower switch operation (p.27).

 

 

 

10, 20,

Shooting is not possible due to an error. Turn the camera off and

30, 40,

on again.

50, 60,

ÎOperate the power switch, remove and install the battery again, or

70, 80

use a Canon lens (p.27, 26).

 

 

 

*If the error still persists, write down the error No. and contact your nearest Canon Service Center.

209