This method allows you to register the scanning procedure from the scanning conditions to the output method as one job, and then scan a document by just selecting the job that suits your purpose. This is convenient when you want to repeat scanning using a set procedure.

Scan with Start Button

Scan First is pre-assigned to the Start button of the scanner, so you can load a document and then start scanning by pressing the Start button.

A4

B5

A5

LTR

 

A5

B5

 

 

A4

 

 

LTR

Start Button

Connecting the Scanner to a Computer

When scanning with CaptureOnTouch, set the Auto Start switch on the rear panel of the scanner to the “OFF” position, and then use the USB cable to connect the scanner to the computer.

Auto Start

OFFON

The power supply USB cable can be connected as necessary.

Starting CaptureOnTouch

Use the following procedure to start CaptureOnTouch. CaptureOnTouch becomes resident in the system when you start the computer, and a CaptureOnTouch icon appears in the taskbar (default). This icon displayed differs as follows depending on the power status of the scanner.

Icon

Meaning

Power is OFF (feed tray is closed)

Power is ON (feed tray is open)

Use the following procedure to start CaptureOnTouch.

1 Open the feed tray.

For details, see 24 page.

2 Click (the CaptureOnTouch icon) in the taskbar and click [Launch CaptureOnTouch] in the menu that appears.

CaptureOnTouch starts and the main screen appears.

Hint

•You can also start it from the Start menu. Click [Start] – [All Programs] – [Canon P-150] – [CaptureOnTouch].

•You can set the CaptureOnTouch icon to not appear in the taskbar when you log onto Windows. For details, see “Environmental Settings” on p. 45.

34