Extron electronic PVS 305SA manual Stage Five Configure the Switcher and the System

Stage Five — Configure the Switcher and the System

Stage 5

Items needed to help complete this stage:

•Laptop (or PC) with a network connection

•MLS Configuration program (on supplied DVD or by download from www.extron.com)

•Global configurator software

•MLC 104 IP Plus User’s Manual

•Projector manufacturer’s user’s manual

•Device driver and/or driver package (download from www.extron.com)

1.Configure the switcher — MLS Switcher Configuration program

a.Run the DVD (or download) and install on a PC or laptop the Extron MediaLink Switcher Configuration program.

b.Ensure the PC and the MLC 104 IP Plus are connected to the LAN.

NIf this is not possible, connect a 2.5 mm TRS configuration cable (part # 70-335-01) to the PC and to the front panel configuration port of

the MLC 104 IP Plus.

c.Launch the MLS Configuration utility. Select the connection format (RS-232 or TCP/IP), or select the emulation mode (see figure 1c ).

NAn offline emulation of the PVS 305SA can aid in becoming familiar with the PVS 305SA before configuring an active unit.

d.Once the program is running click on Help, Contents (or press F1), and follow the instructions.

The MLS Configuration Utility software

1c Launch the MLS Configuration program

1d Select “Help, Contents” and follow instructions

The PVS 305SA emulation mode screen

PoleVault Systems Installation • Installation — Stage 5 2-24