Extron electronic PVS 305SA manual Installation tools

d. Installation tools

To aid the professional installer, this checklist gives the tools recommended to complete the installation. Tools should include, but are not confined to:

•Laser level, or two levels (large for screen installation, small for wall plates and projector mounts)

•Tape measure

•Stud finder

•Drill and drill bit set including a Unibit to cut through metal studs

•Extension drill bit (3/4" min., 4 to 8 foot length, to drill through fire-breaks)

•Socket set

•Pipe strap or wrapped pipe wrench

•Lineman’s pliers and wire strippers

•Standard screwdriver set and Tweeker

•Cable cutters (to cut safety wire)

•Dry wall saw and hacksaw blade mounted on handle (for cutting ceiling tiles)

•Flashlight and safety goggles

•Razor knife

•2" hole saw

•Painter's tape (to mark up walls), pencil, and marker pen

•RJ-45 crimpers and RJ-45 connectors

•Voltage tester

•Fish tape, pull string, and electrical tape (for taping fish tape to pull string)

•Zip ties

•Vacuum cleaner

•Heat gun

PoleVault Systems Installation • Introduction — Inventory Overview 1-9