Extron electronic SIS Commands, PVS 305SA specific symbol definitions, ASCII Telnet, Response

SIS™ Commands

PVS 305SA specific symbol definitions

NFor a complete list of SIS commands for the PVS 305SA, refer to the PVS 305SA User’s Manual available online at www.extron.com

] = CR/LF (carriage return/line feed) (hex 0D 0A)

}= CR (no line feed)

• = Space

E = Escape key

X! = Input numbers 1 through 4, and 7;

0 = all outputs muted (both audio and video)

1 and 2 = RGB inputs

3 and 4 = Composite video inputs

X@ = Audio mode

1 = Dual mono (default)

2 = Stereo

X# = Status 0 = Off 1 = On

X^ = Volume, 0 - 100, default = 50

X2#	= Video type (inputs 3 and 4 only)
	1	= Composite video (default)
	2	= RGB
X2$	= Video signal status
	1	= A video signal present
	2	= No video signal detected
X2%	= 0 to 15 microphone talk-over threshold level range,
	default = 6
X2^	= 0 to 30, program audio ducking level in talk-over mode,
	default = 15
X2&	= Lineout status
	1	= variable (default)
	2	= fixed
X2(	= Paging delay on 1 second steps; default = 0 (disabled),
	1	= 1.0 second, 2.0 = 2 second, ..., 8 = 8.0 second

SIS Command/Response Table

Command		ASCII (Telnet)	Response
		(host - switcher)	(switcher to host)
Video Configuration
Set the video signal type		X!*X2#\	TypX!= X2#]
View the video signal type		X!\	TypX!= X2#]
Status Commands
View all input status		LS	Frq= X2$*X2$*X2$*X2$]
View paging sensor status		42S	Sts42*X#]
Mic Talk-over Threshold
Adjust talk-over threshold		2*X2%#	ThrX2%]
Decrement threshold	-*2#		ThrX2%]
Increment threshold	+*2#		ThrX2%]
View mic threshold	2#		ThrX2%]
Program Audio Ducking Level
Adjust audio ducking level		58*X2^#	AdlX2^]
Increment audio ducking	+*58#		AdlX2^]
Decrement audio ducking	-*58#		AdlX2^]
View audio ducking	58#		AdlX2^]
Set Lineout Mode
Set lineout to variable	55*1#		LineOut*X2&]
Set lineout to fixed	55*2#		LineOut*X2&]
View lineout mode	55#		LineOut*X2&]
Set Audio Output Mode
Set audio output mode to mono	18*1#		PreAmpMod*X@]
Set audio output mode to stereo	18*2#		PreAmpMod*X@]
Set Output Volume Level
Specify volume		X^V	VolX^]
Increment volume		+V	VolX^]
Decrement volume		-V	VolX^]
View volume		V	VolX^]
Paging Sensor Delay
Set paging sensor delay		75*X2(#	PageDly*X2(]
View paging sensor delay	75#		PageDly*X2(]
For full PoleVault device specifications, optional accessories, and part numbers, visit www.extron.com
	PoleVault Systems Installation • Basic SIS Commands			5-1