Troubleshooting

Shoot using the focus lock or AF lock (pp. 96, 99).

Even when you press the shutter button halfway, the AF frame does not appear, and the camera does not focus.

If you center on the light and dark contrasting area of the subject and push the shutter button halfway, or repeatedly push the shutter button halfway, the AF frame will appear and the camera will focus.

Subject is too dark.

Set the flash to h (p. 85).

Correct the brightness with exposure compensation (p. 85).

Adjust the image with i-Contrast (pp. 89, 149).

Use spot metering or AE Lock to shoot (pp. 101, 102).

Subject is too bright (overexposed).

Set the flash to ! (p. 54).

Correct the brightness with exposure compensation (p. 85).

Use spot metering or AE Lock to shoot (pp. 101, 102).

Reduce the light illuminating the subject.

Image is dark even though the flash fired (p. 26).

Shoot within an appropriate distance for flash photography (p. 85).

Increase the ISO speed (p. 88).

Image taken using the flash is too bright (overexposed).

Shoot within an appropriate distance for flash photography (p. 85).

Set the flash to ! (p. 54).

White dots appear on the image when shooting with the flash.

Light from the flash has reflected off dust particles or other objects in the air.

Image appears rough or grainy.

Shoot with the ISO speed on a lower setting (p. 88).

Depending on the Shooting mode, when shooting in a high ISO speed the image may appear rough or grainy (pp. 65, 66).

Eyes appear red (p. 104).

Set the [Red-Eye Lamp] to [On] (p. 173). When shooting with the flash, the lamp (on the front of the camera) lights (p. 42), and for approximately 1 second while the camera is reducing red-eye, it is not possible to shoot. It is more effective if the subject is looking directly at the lamp. Even better results can be obtained by increasing the lighting in indoor settings or approaching closer to the subject.

Correct images with red-eye correction (p. 150).

Recording images to the memory card takes a long time, or continuous shooting slows down.

Perform a low-level format of the memory card in the camera (p. 167).

Cannot make settings for shooting functions or FUNC. menu.

The items in which settings can be made differ depending on the shooting mode. Refer to “Functions Available in Each Shooting Mode” and “Shooting Menu” (pp. 190 197).

182