109
Using the Built-in Flash
In the same way as normal exposure compensation, you can set exposure compensation
for flash. You can set flash exposure compensation up to ±2 stops in 1/3-stop increments.
1Press the <m> button. (9)
2
Set the exposure compensation amount.
While looking at the LCD panel or
viewfinder, turn the <5> dial.
To cancel the flash exposure
compensation, set the flash exposure
compensation amount back to <E>.
When you press the shutter button
halfway, the <
y
> icon will be displayed
in the viewfinder and on the LCD panel.
3Take the picture.
y Flash Exposure CompensationN
Increased exposure
Decreased exposure
If [8C.Fn II -4: Auto Lighting Optimizer] (p.177) has been enabled,
the effect of the exposure compensation and flash exposure
compensation might be minimized. Set it to [3: Disable] if you want to
obtain the best results of the exposure compensation setting.
If you set flash exposure compensation with both the EX-series Speedlite and
camera, the Speedlite’s flash exposure compensation setting will override the
camera’s. If you set EX-series Speedlite’s flash exposure compensation with the
Speedlite, any flash exposure compensation set with the camera will be overridden.
The exposure compensation amount will remain in effect even after you
set the power switch to <2>.
The procedure is the same when using an EX-series Speedlite. The
Speedlite’s flash exposure compensation can be set with the camera.