167
By connecting the camera to a personal computer, you can transfer
images from the camera’s card by operating the camera. This feature is
called direct image transfer.
Before connecting the camera to a personal computer, be sure
to install the provided software (EOS DIGITAL Solution Disk
on CD-ROM) in the personal computer.
For instructions to install the provided software, see the separate
sheet, CD-ROM Guide.
1Connect the camera to the
personal computer.
Turn off the camera’s power switch
before connecting it.
Use the interface cable that came
with the camera.
When connecting the cable plug to
the camera’s <D> terminal, the
cable plug’s <D> icon must face the
front side of the camera.
Connect the plug on other end of the
cable to the personal computer’s
USB port.
2Set the camera’s power switch to
<1>.
When the program selection screen
appears on the personal computer,
select [EOS Utility].
XThe [EOS Utility] screen will appear
on the computer, and the direct image
transfer screen will appear on the
camera’s LCD monitor.