Canon 50, 60 Editing, Printing, Memory Card Operation

	Problem			Solution
The tape stops during		When playback pause continues for more than 4 minutes 30					–
playback pause.		seconds during playback or audio dubbing, the camcorder
		shuts off to protect tape and video heads. Playback the tape						E
		again and press the	/		pause button.
Memory Card Operation
	Problem			Solution
Memory card cannot be		Memory card was not facing the correct direction. Turn the				22
inserted.		memory card over and reinsert it.
Memory card cannot be		Insert a memory card.				22
recorded.
		Memory card is full. Replace the memory card or erase				104
		images.
		Memory card is not formatted. Format the memory card.				105
		File number reached maximum value. Set [FILE NOS.] to				73
		[RESET] and insert a new memory card.
		SD Memory Card is protected. Change the position of the				22
		protect switch.
Memory card cannot be		Set the camcorder to CARD PLAY mode.				41
played back.		Insert a memory card.				22
Image cannot be erased.		Image is protected. Cancel the protection.				103
		SD memory card is protected. Change the position of the				22
		protect switch.
“	” flashes red.	Card error occurred. Turn off the camcorder. Remove and				105
		reinsert the memory card. Format the memory card if flashing
		persists.

Printing

Problem		Solution
The printer is not operating	1.	Set the camcorder to CARD PLAY mode.	–
even though camcorder and	2.	Disconnect and reconnect the USB cable.
printer are correctly	3.	Turn off the printer and turn it back on.
connected.

Editing

Problem			Solution
Dubbing via the camcorder’s	Set [AV	DV/	] (OPTURA60) or [AV	DV] (OPTURA50) to	73
DV terminal does not work.	[OFF].
	Wrong signal format. Dubbing may work via the AV terminal.					–
	Refer also to the instruction manual of the connected device.

Trouble?

139