Step 5: Using the Wireless Controller

Inserting the Battery

 

E

 

 

 

 

 

The wireless controller operates with a lithium button battery CR2025.

1.Press the tab in the direction of the arrow and pull out the battery holder.2.Place the lithium button battery with the + side facing up.3.Insert the battery holder.

Tab

Preparation

Using the Wireless ControllerPoint it at the camcorder’s remote sensor when you press the buttons.

The wireless controller may not work properly when the remote sensor is

subjected to strong light sources or direct sunlight.

If the wireless controller does not work, check if the remote sensor is set to [OFF ] ( 75).

When the camcorder cannot be operated with the wireless controller, or when it can only be operated in very close range, replace the battery.

25