Installing and Removing the Battery and Card

Load a fully-charged Battery Pack LP-E10 into the camera. The card (sold separately) can be an SD, SDHC, or SDXC memory card. The captured images are recorded onto the card.

Make sure the card’s write-protect switch is set upward to enable writing/erasing.

Installing the Battery/Card

 

1

Open the cover.

 

 

Slide the lever as shown by the

 

 

arrows and open the cover.

 

2 Insert the battery.

 

 

Insert the end with the battery

 

 

contacts.

 

 

Insert the battery until it locks in

 

 

place.

Write-protect switch

3 Insert the card.

 

 

As shown in the illustration, face

 

 

the card’s label side toward the

 

 

camera back.

 

 

Insert the card straight in all the way.

 

4 Close the cover.

 

 

Press the cover until it snaps shut.

 

 

When you set the power switch to

 

 

<1>, the number of possible shots

 

 

(p.32) will be displayed on the LCD

 

 

monitor.

28