OO Even when the Ready screen is displayed, you can insert the memory card p. 13 to display the screen in Step 4 and print images in the card.

OO You can stop displaying the Ready screen when you turn the power on by selecting [Disable Wireless LAN] in [Comm. Mode] (p. ‌41).

Printing on Square Stickers

OO You can print square images on stickers using Color Ink Cassette/Square Label Set KC-18IS (p. ‌2). OO Specify borderless printing in the smartphone's application (the [Borders] setting on SELPHY will be

ignored).

Printing in Infrastructure Mode

You can connect wireless LAN ready devices such as smartphones, cameras, and computers to a wireless LAN to print images.

Checking Wireless LAN Settings

OO In order to use a wireless LAN in infrastructure mode, you need to connect a wireless parent station (wireless router, etc.) acting as the access point and a device that transmits images (smartphone, camera, computer, etc.). Any wireless parent stations such as wireless routers are called "access points" in this guide.

OO Some cameras can be used as an access point. Refer to the user guide supplied with your camera.

OO Select wireless LAN standards compliant devices listed on p. 52 for your access point. Refer to the user guide supplied with your access point for information on how to check.

OO Check if your wireless LAN is WPS (Wi-Fi Protected Setup) compatible. If you are not sure whether or not it is WPS compatible, also check the following items.

-- Network name (SSID/ESSID)

-- Network authentication/data encryption (encryption method/encryption mode)* -- Encryption key (network key)

*Supported security settings are [No security], [WEP (open system authentication) (64-bit)], [WEP (open system authentication) (128-bit), [WPA-PSK (TKIP)], [WPA-PSK (AES)], [WPA2-PSK (TKIP)], and [WPA2-PSK (AES)].

OO If your network is managed by the system administrator, request details of network settings from the administrator.

Connecting the Printer to the Wireless LAN

You can connect the printer to the wireless LAN and print from your smartphone, camera, or computer via the access point.

This section describes how to connect a printer to a wireless LAN using a camera as the access point; however, the same procedure applies when you are printing from a smartphone or computer.

Items to Prepare

OO A device that can be used as an access point*

OO A device that transmits images (smartphone, camera, or computer connected to the access point)*

* A camera is used as the access point as well as the transmitter in this example.

1

Prepare the access point.

OO Configure a camera as the access point. Refer to the

user guide supplied with your camera.

OO If you are using an access point other than a camera, check that the device is turned on and able to communicate.

31