OO Use only dedicated paper included in the genuine Canon brand Color Ink Cassette/Paper Sets for use in SELPHY CP series printers. Regular printing paper, regular postcards, or dedicated paper for SELPHY ES series printers cannot be used.

OO Never do the following. This may damage the printer or cause the printer to malfunction.

-- reverse the paper (the glossy side is the print side)

 

-- bend or separate the paper at the perforations before printing

 

-- use label sheets that have begun to peel or label sheets with

 

portions peeled

 

-- write on a sheet before printing

 

-- reuse paper for printing on the blank part (p. 5)‌ .

 

OO Do not touch the springs on the paper cassette.

 

If the springs are bent or deformed, paper will not feed correctly

 

into SELPHY.

 

OO One spring is attached at the center of the top surface on card

 

sized paper cassettes.

 

OO Take care not to touch or rub the print (the glossy) side of the

 

paper, not to handle the paper with wet hands, and not to get any

 

dust or dirt on the paper. Dirt and water drops may cause lines on

Spring

photos, poor print quality, or damage the printer (p. 5)‌ .

Attaching the Dust Protection Cover

By attaching the dust protection cover DPC-CP100, you can prevent dust or dirt from accumulating on the paper. The dust protection cover may not be included in some regions. Purchase separately if required.

OO Insert the dust protection cover as shown in the illustration.

OO In a place with a lot of dust or dirt, or outdoors, the dust protection cover may not be able to prevent dust or dirt from accumulating on the paper, so take care to select a clean environment when using SELPHY.

OO Store the dust protection cover in a bag to prevent dust when not using.

9