Canon Choose, Face the camera and wink, Using the Wink Self-Timer, Press the shutter button all the way down, Compose the shot and press the shutter button halfway

Special Modes for Other Purposes

Still Images

Using the Wink Self-Timer

Aim the camera at a person and press the shutter button all the way down. The camera will shoot about two seconds after a wink is detected.

Choose .

zFollow steps 1 – 2 on p. 78 and choose , and then press the p button.

zPress the qrbuttons to choose , and then press the m button.

Compose the shot and press the shutter button halfway.

zMake sure a green frame is displayed around the face of the person who will wink.

Press the shutter button all the way down.

XThe camera now enters shooting standby mode, and [Wink to take picture] is displayed.

XThe lamp blinks and the self-timer sound is played.

Face the camera and wink.

XThe camera will shoot about two seconds

after detecting a wink by the person whose face is inside the frame.

zTo cancel shooting after you have triggered the self-timer, press the nbutton.

• If the wink is not detected, wink again slowly and deliberately.

• Winking may not be detected if eyes are obscured by hair, a hat, or glasses.

•Closing and opening both eyes at once will also be detected as a wink.

•If winking is not detected, the camera will shoot about 15 seconds later.

•To change the number of shots, press the op buttons after choosing in step 1. [Blink Detection] (p. 74) is only available for the final shot.

•If no one is in the shooting area when the shutter button is pressed all the way down, the camera will shoot after a person enters the shooting area and winks.

93