32
Adjust the Image Quality for Copy
Relation between the density and document type:
If <Density> is set to <Auto Density>, < Original Type> will be changed
to <Text>.

Adjusting the density

You can make the density brighter or darker than the original documents.
1
Place your documents (p.19).
2
Switch to the Copy mode (p.16).
3
Press [] or [] to highlight <Density>, and then press [OK].
4
Press [] or [] to adjust the density , and then press [OK].
Select <Auto D ensity> to use the density that is most suitable for the document.
Density
Auto Density
Manual Density
- +
– : Less density (lighter)
+ : More density (darker)
5
Press [ ] (Start).

Selecting the Document Type

Select the appropriate document type.
1
Place your documents (p.19).
2
Switch to the Copy mode ( p.16).
3
Press [] or [] to highlight <Original Type>, and then press [OK].
4
Press [] or [] to highlight the appropriate document type, and then
press [OK].
<Text > Best suited for text-only documents.
<Text /Ph ot o (H igh
Speed)>
Suitable for documents that contain text and photos.
(Scanned documents are at a low resolution at high
speed.)
<Text /Pho to> Suitable for documents that contain text and photos.
<Photo> Suitable for documents that contain large photos.
5
Press [ ] (Start).