<A> is a fully automatic mode. The camera analyzes the scene and sets the optimum settings automatically.
With Scene Intelligent Auto, the camera always focuses automatically. You can select one of three AF methods with the menu or Quick Control screen. When you select [u(face)+Tracking], the person’s face will be detected and focused (p.66). [FlexiZone - Multi] makes it easier to focus a moving subject (p.68). [FlexiZone - Single] uses only one AF point to focus the desired target subject (p.69).
Using [u(face)+Tracking] is explained below.
| 1 Set the Mode Dial to <A>. |
AF point | 2 Check the AF point. |
| When a face is detected, the <p> AF |
| point will appear over the face to be |
| focused. |
| You can also tap the screen to select the |
| face or subject. If the subject is not a |
| face, < > will be displayed. |
| If no faces are detected or if you tap the |
| screen but do not select any face or |
| subject, the camera will switch to |
| [FlexiZone - Multi] for automatic |
| selection (p.68). |
48