•After you have accessed the Wi-Fi menu once, you can access it again by pressing the <o> button. The recent target device is listed first, so you can easily connect again by pressing the <o><p> buttons to choose it. To add a new device, display the device selection screen by pressing the <q><r> buttons, and then configure the setting.

If you prefer not to display recent target devices, press the <n> button, and on the [3] tab, choose [Wi-Fi Settings] > [Target History] > [Off].

•To add multiple cameras, repeat the above procedures starting from step 1.

•Once a camera is added, the camera nickname will be displayed on the screen in step 3. To connect to a camera again, simply choose the camera nickname from the list.

Connecting to a Computer

Configure computer settings for the connection, add the computer as a connection destination, and transfer images to the computer wirelessly using the included software CameraWindow as follows.

• When connected to a computer, the camera is used to establish the connection and then the computer (included software CameraWindow) is used to transfer images.

Preparing to Register a Computer

Prepare to register a computer.

Checking our Computer Environment

For computer environments that allow Wi-Fi connection with a camera, refer to “System Requirements” (=19).

Additionally, the included software CameraWindow must be installed (=19).

•Windows 7 Starter and Home Basic editions are not supported.

• Windows 7 N (European version) and KN (South Korean version) require a separate download and installation of Windows Media Feature Pack.

For further details, see the following website. http://go.microsoft.com/fwlink/?LinkId=159730

Cover

Preliminary Notes and

Legal Information

Contents:

Basic Operations

Basic Guide

Advanced Guide

1

Camera Basics

2

ModeSmart Auto

3

Other Shooting

Modes

4

P Mode

5 Playback Mode

6

Wi-Fi Functions

7

Setting Menu

8

Accessories

9

Appendix

Index

94