Low-Level Formatting

Perform low-level formatting in these cases: [Memory card error] is displayed, the camera is not working correctly, card image reading/writing is slower, continuous shooting is slower, or movie recording suddenly stops. Low-level formatting erases all data on a memory card. Before low-level formatting, copy images on the memory card to a computer, or take other steps to back them up.

zzTouch the field to the left of [Low Level Format] to select it (mark with a []).

zzFollow steps 2 – 3 in “Formatting Memory Cards” (=108) to continue with the formatting process.

• Low-level formatting takes longer than “Formatting Memory Cards” (=108), because data is erased from all storage regions of the memory card.

•You can cancel low-level formatting in progress by touching [Stop]. In this case, all data will be erased, but the memory card can be used normally.

Metric/Non-Metric Display

Change the unit of measurement shown in GPS information for elevation (=67) and elsewhere from m/cm to ft/in as needed.

zzChoose [Units], and then choose [ft/in].

Increasing Touch-Screen Panel Sensitivity

Sensitivity of the touch-screen panel can be increased, so that the camera responds to a lighter touch.

zzChoose [Touch Response], and then choose [High].

Adjusting Wi-Fi Settings

The following options are available by choosing [Wi-Fi Settings] > [Mobile Device Connect Button].

•Change the nickname (=103)

•Check the camera’s MAC address (=93)

•Reset the Wi-Fi settings (=103)

•Disable display of recent target devices (=88)

•Remove smartphones assigned to the <> button (=104)

Cover

Preliminary Notes and

Legal Information

Contents: Basic

Operations

Basic Guide

Advanced Guide

1

Camera Basics

2

ModeCreative Shot

3

Auto Mode/

Hybrid Auto Mode

4

Other Shooting

Modes

5 P Mode

6

Playback Mode

7

Wi-Fi Functions

8

Setting Menu

9

Accessories

10

Appendix

Index

109