FUEL HANDLING

Fuel

Note! The machine is equipped with a two-stroke engine and must always be run using a mixture of petrol and two-stroke oil. It is important to accurately measure the amount of oil to be mixed to ensure that the correct mixture is obtained. When mixing small amounts of fuel, even small inaccuracies can drastically affect the ratio of the mixture.

WARNING! Always ensure there is adequate

!ventilation when handling fuel.

Petrol

Use good quality unleaded or leaded petrol.

CAUTION! Engines equipped with catalytic converters must be run on unleaded fuel mixtures.

Leaded gasoline will destroy the catalytic converter and it will no longer serve its purpose. The green fuel cap on saws fitted with catalytic converters means that only unleaded gasoline can be used.

The lowest recommended octane grade is 90 (RON). If you run the engine on a lower octane grade than 90 so- called knocking can occur. This gives rise to a high engine temperature and increased bearing load, which can result in serious engine damage.

When working with continuous high revs (e.g. limbing) a higher octane is recommended.

Environment fuel

HUSQVARNA recommends the use of alkylate fuel, either Aspen two-stroke fuel or environmental fuel for four-stroke engines blended with two-stroke oil as set out below. Note that carburettor adjustment may be necessary when changing the type of fuel (see the instructions under the heading Carburettor).

Running-in

Avoid running at a too high speed for extended periods during the first 10 hours.

Two-stroke oil

For best results and performance use HUSQVARNA two- stroke engine oil, which is specially formulated for our air- cooled two-stroke engines.

Never use two-stroke oil intended for water-cooled engines, sometimes referred to as outboard oil (rated TCW).

Never use oil intended for four-stroke engines.

A poor oil quality and/or too high oil/fuel ratio may jeopardise function and decrease the life time of catalytic converters.

Mixing ratio

1:50 (2%) with HUSQVARNA two-stroke oil.

1:33 (3%) with oils class JASO FB or ISO EGB formulated for air-cooled, two-stroke engines.

Petrol, litre

Two-stroke oil, litre

 

 

2% (1:50)

3% (1:33)

 

 

 

 

5

0,10

0,15

 

 

 

10

0,20

0,30

 

 

 

15

0,30

0,45

 

 

 

20

0,40

0,60

 

 

 

Mixing

Always mix the petrol and oil in a clean container intended for fuel.

Always start by filling half the amount of the petrol to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture. Add the remaining amount of petrol.

Mix (shake) the fuel mixture thoroughly before filling the machine’s fuel tank.

Do not mix more than one month’s supply of fuel at a time.

If the machine is not used for some time the fuel tank should be emptied and cleaned.

Chain oil

We recommend the use of special oil (chain oil) with good adhesion characteristics.

Never use waste oil. This results in damage to the oil pump, the bar and the chain.

It is important to use oil of the right grade (suitable viscosity range) to suit the air temperature.

In temperatures below 0°C (32°F) some oils become too viscous. This can overload the oil pump and result in damage to the oil pump components.

Contact your service agent when choosing chain oil.

English – 17

Page 17
Image 17
Husqvarna 455 RANCHER manual Fuel Handling

455 RANCHER specifications

The Husqvarna 455 Rancher is a powerful chainsaw designed for both professional users and avid homeowners. Renowned for its robust construction and unparalleled performance, this chainsaw is an excellent choice for those who demand reliability and accuracy in their outdoor tasks.

At the heart of the 455 Rancher is its 55.5 cc X-Torq engine, which offers a perfect blend of power and fuel efficiency. This advanced engine technology reduces fuel consumption by up to 20% while simultaneously minimizing exhaust emissions, making it an environmentally conscious choice. The system also provides higher torque over a wider RPM range, ensuring that users have the power they need when cutting through larger logs or tough wood.

The 455 Rancher features a high output air filtration system, which enhances the lifespan of the chainsaw by ensuring the engine stays clean and well-protected from dust and debris. This system is particularly beneficial for users who work in dusty or challenging environments, as it requires less frequent filter cleaning and replacement.

Another notable characteristic of the Husqvarna 455 Rancher is its anti-vibration technology. This feature minimizes vibrations during operation, significantly reducing operator fatigue and enabling longer and more comfortable use. The chainsaw also comes equipped with an ergonomic design, including a well-balanced construction that allows for better maneuverability.

Safety is paramount with the 455 Rancher, which is equipped with a variety of safety features. The chain brake is a critical component that helps prevent accidental injury by halting the chain's movement in the event of kickback. Additionally, the chainsaw includes a low kickback chain designed to lessen the risk of kickback incidents while cutting.

The chainsaw boasts an adjustable oil pump that allows users to control the amount of oil delivered to the chain, ensuring optimal lubrication and extending the life of the chain and bar. Combined with an easy-to-access fuel and oil tank, the Husqvarna 455 Rancher is engineered for user convenience.

In conclusion, the Husqvarna 455 Rancher stands out for its powerful engine, efficient fuel consumption, advanced safety features, and user-centric design. Whether for professional forestry work or home landscaping projects, this versatile and durable chainsaw is a reliable tool that can tackle a wide range of cutting tasks with ease.