MAINTENANCE

Tensioning the recoil spring

•Hook the starter cord in the notch in the pulley and turn the starter pulley about 2 turns clockwise.

Note! Check that the pulley can be turned at least a further 1/2 turn when the starter cord is pulled all the way out.

1

2

Changing a broken recoil spring

•Lift off the pulley. See instructions under heading Changing a broken or worn starter cord.

•Remove the recoil spring from inside the pulley by tapping the pulley lightly with its inside face downwards against a work bench or the like. If the spring pops out during fitting, wind it up again, working from the outside in towards centre.

•Lubricate the recoil spring with light oil. Fit the pulley and tension the recoil spring.

Fitting the starter

•To fit the starter, first pull out the starter cord and place the starter in position against the crankcase. Then slowly release the starter cord so that the pulley engages with the pawls.

•Fit and tighten the screws that hold the starter.

Air filter

The air filter must be regularly cleaned to remove dust and dirt in order to avoid:

•Carburettor malfunctions

•Starting problems

•Loss of engine power

•Unnecessary wear to engine parts.

•Excessive fuel consumption.

•Remove the air filter after taking off the air filter cover. When refitting make sure that the air filter seals tightly against the filter holder. Clean the filter by brushing or shaking it.

The filter can be cleaned more thoroughly by washing it in water and detergent.

An air filter that has been in use for a long time cannot be cleaned completely. The filter must therefore be replaced with a new one at regular intervals. A damaged air filter must always be replaced.

A HUSQVARNA chain saw can be equipped with different types of air filter according to working conditions, weather, season, etc. Contact your dealer for advice.

Spark plug

The spark plug condition is influenced by:

•Incorrect carburettor adjustment.

•An incorrect fuel mixture (too much or incorrect type of oil).

•A dirty air filter.

These factors cause deposits on the spark plug electrodes, which may result in operating problems and starting difficulties.

If the machine is low on power, difficult to start or runs poorly at idle speed: always check the spark plug first before taking any further action. If the spark plug is dirty, clean it and check

English – 33

Page 32 Page 34
Page 33
Image 33
Husqvarna 455 RANCHER manual Air filter, Spark plug, Tensioning the recoil spring, Changing a broken recoil spring
Page 32 Page 34

455 RANCHER specifications

The Husqvarna 455 Rancher is a powerful chainsaw designed for both professional users and avid homeowners. Renowned for its robust construction and unparalleled performance, this chainsaw is an excellent choice for those who demand reliability and accuracy in their outdoor tasks.

At the heart of the 455 Rancher is its 55.5 cc X-Torq engine, which offers a perfect blend of power and fuel efficiency. This advanced engine technology reduces fuel consumption by up to 20% while simultaneously minimizing exhaust emissions, making it an environmentally conscious choice. The system also provides higher torque over a wider RPM range, ensuring that users have the power they need when cutting through larger logs or tough wood.

The 455 Rancher features a high output air filtration system, which enhances the lifespan of the chainsaw by ensuring the engine stays clean and well-protected from dust and debris. This system is particularly beneficial for users who work in dusty or challenging environments, as it requires less frequent filter cleaning and replacement.

Another notable characteristic of the Husqvarna 455 Rancher is its anti-vibration technology. This feature minimizes vibrations during operation, significantly reducing operator fatigue and enabling longer and more comfortable use. The chainsaw also comes equipped with an ergonomic design, including a well-balanced construction that allows for better maneuverability.

Safety is paramount with the 455 Rancher, which is equipped with a variety of safety features. The chain brake is a critical component that helps prevent accidental injury by halting the chain's movement in the event of kickback. Additionally, the chainsaw includes a low kickback chain designed to lessen the risk of kickback incidents while cutting.

The chainsaw boasts an adjustable oil pump that allows users to control the amount of oil delivered to the chain, ensuring optimal lubrication and extending the life of the chain and bar. Combined with an easy-to-access fuel and oil tank, the Husqvarna 455 Rancher is engineered for user convenience.

In conclusion, the Husqvarna 455 Rancher stands out for its powerful engine, efficient fuel consumption, advanced safety features, and user-centric design. Whether for professional forestry work or home landscaping projects, this versatile and durable chainsaw is a reliable tool that can tackle a wide range of cutting tasks with ease.
Top Page Image Contents