Preparing the Camcorder
Preparing the Camcorder
This section covers the basic preparations for the camcorder such as attaching the handle unit and lens hood, and adjusting the viewfinder and OLED screen. When attaching the lens hood, grip belt and straps, be careful not to drop the camcorder by placing it on a table or other stable surface.
24Attaching the Microphone Holder Unit
Use the supplied screws to attach the microphone holder unit to the handle unit.
Attaching the Handle Unit
1 Align the handle unit with the handle attachment unit and then slide the handle unit forward until it is in place.
• Make sure the front and rear screws are raised when you slide the handle unit.
2 Firmly tighten the front and rear screws with a coin or similar object.
NOTES
• The camcorder is functional even if you remove the handle unit. However, some audio options (A79), the infrared light and tally lamp will not be available.