Connecting to an External Monitor
Selecting the Terminal Used For Output
To output your recordings on an external monitor, you must first select which terminal you will use.
1Open the [Output Terminal] screen.
[FUNC.] >[MENU] >q>[Output Terminal]
• Touching [FUNC.] is necessary only when performing the procedure in mode.
2 Touch the desired option and then touch [X].
108• If you selected [
Options
[jOff] There is no output from any terminal.
[
[There is output from the
[ HDMI] There is output only from the HDMI OUT terminal. [ÒAV OUT] There is output only from the AV OUT terminal.
Using the
The digital signal output from the
1 Open the
[FUNC.] >[MENU] |
|
• Touching [FUNC.] is necessary only when performing the procedure in | mode. |
2 Touch the desired option and then touch [X].
NOTES
•By default, onscreen displays will be embedded in the output video signal. You can change this using the q>[Output Onscreen Displays] setting.
Using the HDMI OUT Terminal
The HDMITM OUT terminal also offers a digital connection and outputs both a video and audio signal. If you selected [kAutomatic], the output signal will automatically switch to HD or SD depending on
the capability of the external monitor. In mode, when the recording mode is set to 28 Mbps LPCM (59.94P) or 24 Mbps LPCM, the HDMI OUT terminal outputs
1Open the [HDMI Output] screen.
[FUNC.] >[MENU] >q>[HDMI Output]
• Touching [FUNC.] is necessary only when performing the procedure in mode.
2 Touch the desired option and then touch [X].