LCD monitorCamera screen is black at start-up

Incompatible image has been selected as the start-up image in the My Camera settings.

zChange the start-up image in the My Camera settings (p. 104) or use the supplied software program ZoomBrowser EX or ImageBrowser to restore the default settings. See ZoomBrowser EX/ ImageBrowser Software User Guide (PDF).

The display darkens.

The image in the LCD monitor will darken in strong sunlight or bright light.

zThis is a normal occurrence in devices containing CCDs and does not constitute a malfunction. (This image will not be recorded when shooting still images, but it will be recorded when shooting movies.)

Display flickers.

Display flickers when

zThis is not a camera malfunction

shot under fluorescent

(flickering recorded in movies, but

lighting.

not in still images).

A bar of light (red, purple) appears on the LCD monitor.

This may occur when shooting a bright subject, such as the sun or a light.

zThis is a normal occurrence in devices containing CCDs and does not constitute a malfunction. This bar of light will not be recorded when shooting still images, but it will be recorded when shooting movies.

appears.

A slow shutter speed has likely been selected because of insufficient lighting.

zSet IS mode to a setting other than [Off] (p. 32).

zRaise the ISO speed (p. 65) or set the flash to any setting other than (flash off) (Basic Guide p. 14), or secure the camera to something, such as a tripod.

108