Canon 850 IS, SD800 IS Image contains noise, Subject in recorded image is too dark, Subject in recorded image is too bright, or image flashes white

Subject in recorded image is too dark.

Insufficient light for	zSet the flash to	(flash on) (Basic
shooting.	Guide p. 14).
The subject is	zSet the exposure compensation to a
underexposed because	positive (+) setting (p. 52).
the surroundings are too	zUse AE lock or use the spot metering
bright.	function (pp. 49, 51).
Subject is too far away	zShoot within correct shooting
for flash to reach.	distance of the subject when using
	the built-in flash (p. 130).
	zRaise the ISO speed and then shoot
	(p. 65).

Subject in recorded image is too bright, or image flashes white.

Subject is too close,	zShoot within correct shooting
making the flash too	distance of the subject when using
strong.	the built-in flash (p. 130).
The subject is	zSet the exposure compensation to a
overexposed because	negative (-) setting (p. 52).
the surroundings are too zUse AE lock or use the spot metering
dark.	function (pp. 49, 51).

Too much light is shining zChange the shooting angle. directly into the camera,

or is being reflected off the subject.

Flash is set to on. zSet the flash to (flash off) (Basic Guide p. 14).

Image contains noise.

ISO speed is too high. zHigher ISO speeds and the (High ISO Auto) setting may increase image noise. For higher image quality, select as low an ISO speed as possible (p. 65).

zIn , , , , , and modes, the ISO speed increases and noise can appear.

Troubleshooting

111