JVC CA-UXJ55MD Joining Two Groups-JOINGR, repeatedly until “JOIN GR ?”, Press ENTER, Press SET

Continued

Joining Two Groups—JOIN GR 5 Press SET. SET

English

This function allows you to join two adjacent groups into a single group.

When the groups have their own titles, the title of the preceding group is reassigned to the newly joined group. Once two groups are joined, the other groups are renumbered.

•To stop any time during the editing process below before step 6, press GROUP TITLE/EDIT.

•To cancel the setting, press CANCEL, then repeat from step 4.

1 Insert an MD you want to edit into the MD loading slot.

On the remote control ONLY:

2 Press GROUP TITLE/EDIT	/EDIT
	GROUP TITLE
repeatedly until “JOIN GR ?”
appears on the display.

• If you want to stop this editing process, press CANCEL.

6 Press ENTER. ENTER

“EDITING” appears on the display. Then “WRITING” and the REC (MD recording) indicator flash while the editing you have made is being recorded on the MD.

To divide the group, see the DIVIDE GR function on page 41.

When “CANNOT JOIN” appears on the display in step 5

You are trying to join two groups which are separated by another track(s) in- between. In this case, you need to move either of the groups (see page 43) or the track(s) (see page 49).

3 Press SET. SET

•If the loaded MD has only one or no group, you cannot go to the following steps.

•During playback:

The group number of the currently playing track will appear on the right. If the track does not belong to any group, the group number will be indicated as “– –.”

4 Press GROUP SKIP ¢or GROUP SKIP

4while holding SHIFT to select the two adjacent groups you want to join.

GROUP SKIP GROUP SKIP

SHIFT

Ex.: When groups 7 and 8 are selected.

42