JVC GVT0104-002A manual Enter characters, Press ENTER to finish the current, title entry, English

Continued

English

5 Enter characters.

1) Press DISP/CHARA to select the	DISP/CHARA
character set you want.

•Each time you press the button, the character set changes as follows:

Capital letters		Small letters
& Symbols		& Symbols
Numerals
2) Press the character entry
button for a character you	1	2	3
want to enter.
Ex.:	4	5	6
• To enter an “A” or “a,” press
ABC once.	7	8	9
To enter a “B” or “b,” press
ABC twice.	10	0	+10
To enter a “C” or “c,” press

ABC three times.

•To enter a symbol, press MARK repeatedly until the

mark you want appears. For available symbols, see page 53.

•To enter a numeral, press 0 – 9.

•To enter a space while entering a title, press twice.

•To move the character entry position while entering a title, press or *.

•If you have entered an incorrect character, press or to select the character you want to correct, then press CANCEL to delete it.

*If you press repeatedly during recording, the entered characters may be displayed incorrectly. In this case, press TITLE/EDIT or GROUP TITLE/EDIT, then repeat from step 2 again.

6 Press ENTER to finish the current	ENTER
title entry.

“EDITING” appears on the display for a while, then the next title entry screen appears.

•For the disc title:

The track title entry screen for the track 1 appears.

•For the track title:

The next track title entry screen appears (or the unit exits from the title entry screen if the current track is the last one on the disc).

•For the group title:

The next group title entry screen appears (or the same screen still remains if the current group is the last one on the disc).

If you want to continue assigning a title, repeat steps 3 to 6.

7 Press CANCEL to exit from the	CANCEL
title entry mode.

•While recording, do not go to the next step until the recording ends.

8	Press 0 (MD eject) on the unit	0
	to eject the MD.
		‹/8
	“WRITING” and the REC (MD	MD
	recording) indicator flash while the
	editing you have made is being recorded on the MD.

3)Repeat steps 5 – 1) and 5 – 2) to enter other characters.

•If the character you want to enter next is assigned to the same button you have just pressed in step

5 – 2), press once to move the character entry position to the right.

•The display can only show 6 characters at a time. If you enter the 7th character, the first character disappears, and so on.

52