JVC CA-UXJ55MD manual Using the Timers, Using Recording Timer, How Recording Timer actually works

REV.

MODE

Using the Timers Continued

English

There are three timers available—Recording Timer, Daily Timer and Sleep Timer.

•Before using these timers, make sure the built-in clock is set correctly (see page 9).

•When using the tuner as the source, preset stations in advance (see page 14).

Using Recording Timer

With Recording Timer, you can make an unattended recording.

•You can set Recording Timer whether the unit is turned on or off (on standby).

•To correct a mis-entry any time during the setting process, press CANCEL.

•To exit from the timer setting during the process, press CLOCK/TIMER repeatedly until the source indication appears.

How Recording Timer actually works

The unit automatically turns on, muting the volume, and starts recording on the MD or on the tape when the start time comes. Then, when the shut-off time comes, the unit automatically turns off (on standby).

Recording Timer works only once, but the timer settings remain stored in memory until you reset them or unplug the AC power cord.

On the remote control ONLY:

1 Press CLOCK/TIMER repeatedly CLOCK/

TIMER

until “REC TIMER” appears on the display.

The (timer) indicator lights up and the

REC (recording timer) indicator starts flashing on the display.

REC

•Each time you press the button, the timer changes as follows:

REC TIMER DAILY TIMER

Source indicator	Clock setting
(canceled)

2 Press SET. SET

The source name flashes on the display.

3 Select the source to record from.

1) Press ¢or 4repeatedly	GROUP SKIP	GROUP SKIP
to select the source.

•Each time you press the button, the source changes as follows:

FM AM AUX

2)When you select “FM” or “AM,” press SET, then select a preset number by pressing ¢or 4.

GROUP SKIP GROUP SKIP

SET

When you select “AUX,” set the timer function of the external component as well.

3) Press SET. SET

A device to record onto flashes on the display.

4 Select the device to record onto.

1)	Press ¢or 4repeatedly		GROUP SKIP	GROUP SKIP
	to select the device.
	MD REC	TAPE REC
2)	Press SET.			SET

3)When you select “MD REC,” select the recording length mode (see page 30) by pressing ¢or 4, then press SET again.

GROUP SKIP GROUP SKIP

SET

When you select “TAPE REC,” select Reverse Mode (see page 26) by pressing REV.MODE when you prepare the

device.

When recording starts, reverse mode indicator changes

toautomatically.

The hour digits of the start time start flashing.

54