Playing Back Tapes
English
Playing Back a Tape
You can play back type I tapes.
1 Insert a cassette into the cassette loading slot with the exposed part of the tape facing left.
•When the unit is turned on, the TAPE indicator appears on the display.
•If you insert the cassette when the unit is on tape mode, “TAPE LOADING” appears on the display.
Tape operation indicators
TAPE
2 Press TAPE 2 3. | TAPE |
Playback starts (if the unit has been on | 23 |
standby, the unit automatically turns on). |
|
To change the tape direction, press the button again.
•Each time you press the button, the tape direction changes as follows:
:Plays the front side.
:Plays the reverse side.
Tape direction indicator | TAPE indicator |
TAPE |
|
Reverse Mode indicator | Tape direction |
When the tape plays to the end, the deck automatically
stops if Reverse Mode is set to 
or 
. (See “To play both
To stop during play, press 7.
To
The tape direction indicator (3 or 2) starts flashing rapidly on the display.
To remove the cassette, press 0 (TAPE eject) on the unit. The TAPE and tape operation indicators go off.
Pressing 0 (TAPE eject) button also turns on the unit if the cassette is unlocked.
DO NOT press 0 (TAPE eject) during tape play.
To play both sides—Reverse Mode
You can set the deck to play just one side or both sides of a tape once, or both sides continuously.
Press REV.MODE. | REV. |
| MODE |
• Each time you press the button, Reverse Mode changes as follows:
: Plays back only one side (front or reverse). 
: Plays back the front and reverse sides once.
: Plays back both front and reverse sides continuously.
When you eject the cassette, Reverse Mode changes to
automatically.
• The use of
•You can also play back type II and type IV tapes; however, the sound quality (tone) may not be reproduced properly.
To prohibit cassette ejection—Cassette Lock
You can prohibit cassette, disc, and MD ejection from the unit, and lock the cassette.
See “Prohibiting Disc
26
