JVC CA-UXJ55MD Joining Two Tracks-JOIN, Insert an MD you want to edit into the MD, Loading slot

Continued

Joining Two Tracks—JOIN			5 Press SET.		SET
This function allows you to join two adjacent tracks into one
track.
When the tracks have their own titles, the title of the
preceding track is reassigned to the newly joined track.
Once two tracks are joined, the other tracks and/or the groups				• To cancel the setting, press CANCEL, then repeat from
are renumbered.
				step 4.
• To stop any time during the editing process below before
			6 Press ENTER.
	step 6, press TITLE/EDIT.				ENTER
1				“EDITING” appears on the display. Then
		Insert an MD you want to edit into the MD		“WRITING” and the REC (MD recording)
				indicator flash while the editing you have
		loading slot.
				made is being recorded on the MD.

On the remote control ONLY:

English

2 Press TITLE/EDIT repeatedly	TITLE/EDIT
until “JOIN ?” appears on the
display.

•If the loaded MD has no track, “JOIN ?” will not appear.

•If you want to stop this editing process, press CANCEL.

3 Press SET. SET

To divide the joined tracks, see the DIVIDE function on

page 47.

•If “CANNOT JOIN” appears in step 5

You cannot join the following tracks.

–Tracks recorded using different recording length modes (SP, LP2, LP4). (See page 30.)

–Digital-recording tracks and analog-recording tracks.

–Tracks recorded using monaural long recording method (not possible on this unit) and stereo-recording tracks.

•When the track belongs to a group

If the preceding track of two tracks you want to join belongs to a group, the newly joined track will belong to that group. On the other hand, if the preceding track does not belong to any group, the newly joined track will not belong to any group even if the succeeding track belongs to a group.

•If the loaded MD has only one track, you cannot go to the following steps.

4 Press ¢ or 4 to select	GROUP SKIP	GROUP SKIP
the two adjacent tracks you
want to join.

•You can also select the tracks

using the number buttons*. In this case, the selected track starts playing repeatedly.

Ex.: When tracks 2 and 3 are selected.

*Select the succeeding track of two tracks when you use the number buttons.

48