JVC 0803AIMMDWJEM, CA-UXJ55MD Press REV.MODE to select, Reverse Mode, Press TAPE REC, English

English

To record from external equipment:

1)Press FM/AM/AUX (or AUX/DVD on the unit) to select “AUX.”

FM/AM

/AUX

AUX/DVD

FM/AM

(On the remote control) (On the unit)

2)Prepare the external equipment to play.

•Adjust the audio input level if necessary (see page 27).

•For operation of the external equipment, see the manuals supplied with it.

2 Put a recordable cassette into the cassette loading slot.

3 Press REV.MODE to select	REV.
	MODE
Reverse Mode.

•Each time you press the button, Reverse Mode changes as follows:

Recording on	Recording on both
one side.	sides once.

To record a single track of a CD/MD during play

On the remote control ONLY:

While playing back a track of a CD or MD	TAPE
you want to record, press TAPE REC.	REC

The playback of the track is stopped, and the same track starts playing from the beginning

again. This time, the cassette deck starts recording the track.

•After the track is recorded, both playback and recording stop automatically.

When you press TAPE REC while pausing a track

Recording starts from that point.

To change the information shown on the display

On the remote control ONLY:

Press DISP/CHARA. DISP/CHARA

• Each time you press the button, the information on the display alternates between the recording indication and the clock indication.

* will be shown during recording when you select .

4 Press TAPE REC.	REC
	TAPE

The REC (tape recording) and tape direction indicators start flashing on the display.

When the source is “FM” or “AM,” recording starts.

When the source is “CD” or “MD,” playback and

recording starts—Synchronized Recording.

When the CD or MD player stops, recording also stops automatically.

When the source is “AUX,” starts playback after “AUX

=TAPE” appears on the display.

TAPE

REC

Ex.: When you record an FM broadcast

•When you select a track by pressing ¢ or 4 before pressing TAPE REC, recording starts from the selected track (except when Program Play is selected).

•When recording from an external equipment, start playback after “AUX =TAPE” appears on the display.

To stop recording, press 7.

When recording a disc or an MD

•A 4-second blank is automatically made on the tape before each track. To record without the blank, press CD 6 or MD 6 twice in step 1, then press TAPE REC.

•When the front side of the tape ends in the middle of a track, the recording on the reverse side starts from the beginning of that track (if the reverse

mode is set to ).

However, if the front side ends within 12 seconds from the beginning of a track, recording on the reverse side starts from the previous track.

35