JVC 0803AIMMDWJEM manual Changing the Title, Follow steps 1 to 4 on page, Select the character you

English

You can assign titles during play or recording

Changing the Title

You can make a correction or change the title.

•	During play:
	Entering a track title
	The MD recorder repeats playback of the current track until you press
	ENTER in step 6. When you press ENTER, the next track will be
	played.
	Entering a disc title
	The MD recorder repeats playback of all tracks of the MD until you
	press ENTER in step 6. When you press ENTER, the MD recorder
	enters the track title entry mode.
	Entering a group title
	The MD recorder repeats playback of the tracks in the group until you
	press ENTER in step 6. When you press ENTER, the MD recorder
	enters the next group title entry mode.
•	During recording:
	Entering a track title

1	Follow steps 1 to 4 on page 51.
2	Select the character you
	want to correct, by pressing 10
	or .

•Make sure that the character you want to change is flashing.

3 Press CANCEL to delete the character you have selected in the above step.

+10

CANCEL

The MD recorder continues recording even after you press ENTER in

step 6. When you press ENTER, a track title is assigned to the track

where you have started the title entry. If you do not press ENTER

before recording ends, the track title assigned will be canceled.

• During CD-MD or CD Synchronized Recording (see pages 30 and 36):

You can assign the disc title, and 16 track titles one after another as

recording goes on. The track titles you have entered are automatically

assigned to the tracks recorded on the MD in sequential order.

“EDITING” appears on the display for a while, then the next title entry

screen appears. If you enter 17th track title or more, they are ignored.

When you unplug the AC power cord or if a power failure occurs before step 8

The editing you have made is not recorded on the MD.

Available symbols are as follows:

(Blank)

4 Enter the correct character, referring to step

5 on page 52.

5 Repeat steps 2 to 4 of the current procedure to correct more characters.

6 Press ENTER to finish correcting	ENTER
the title.

“EDITING” appears on the display for a while, then the next title entry screen appears.

• If you want to correct another title, select another title entry mode by pressingor , press SET, then repeat from step 2 above.

• If you want to finish the correction, go to the next step.

7 Press 0(MD eject) on the unit

to eject the MD.	0
	‹/8
“WRITING” and the REC (MD
	MD
recording) indicator flash while the

editing you have made is being recorded on the MD.

To erase all the characters, press CANCEL repeatedly in step 3 above to erase all the characters, then go to step 6.

53