English

Moving a Group—MOVE GR

This function allows you to move a group.

Once a group is moved, the tracks and the other groups are renumbered.

To stop any time during the editing process below before step 8, press GROUP TITLE/EDIT.

1 Insert an MD you want to edit into the MD loading slot.

On the remote control ONLY:

2 Press GROUP TITLE/EDIT

/EDIT

 

GROUP TITLE

repeatedly until “MOVE GR ?”

 

appears on the display.

 

• If you want to stop this editing process, press CANCEL.

3 Press SET.

SET

 

5

Press SET.

SET

 

To cancel the setting, press CANCEL, then repeat from step 4.

6 Press GROUP SKIP ¢or GROUP SKIP

4while holding SHIFT to select the position where you want to move the group to.

GROUP SKIP

GROUP SKIP

SHIFT

Ex.: When group 3 is moved to group 10.

7 Press SET.

SET

• If the loaded MD has only one or no group, you cannot

 

 

 

 

go to the following steps.

 

 

 

• To cancel the setting, press CANCEL, then repeat from

During playback:

 

 

 

step 4.

 

The group number of the currently playing track will

 

 

 

 

8 Press ENTER.

 

appear. If the track does not belong to any group, the

ENTER

group number will be indicated as “– –.”

 

 

“EDITING” appears on the display. Then

 

 

 

 

 

 

 

 

 

4 Press GROUP SKIP ¢or GROUP SKIP

 

 

“WRITING” and the REC (MD recording)

 

 

 

indicator flash while the editing you have

 

4while holding SHIFT to select the group

 

 

made is being recorded on the MD.

 

you want to move.

 

 

 

 

 

GROUP SKIP

GROUP SKIP

 

 

 

 

SHIFT

 

 

 

 

 

Ex.: When group 3 is selected.

43

Page 46
Image 46
JVC GVT0104-002A, CA-UXJ55MD Moving a Group-MOVE GR, Repeatedly until Move GR ? Appears on the display, You want to move