Specifications | JVC GVT0104-002A, CA-UXJ55MD, 0803AIMMDWJEM

Specifications

English

CA-UXJ55MD

Amplifier

Output Power (IEC 268-3):


40 W (20 W + 20 W) at 4		Ω (MAX.)
30 W (15 W + 15 W) at 4		Ω (10 % THD)
Audio input sensitivity/Impedance (at 1 kHz)
Analog input:	400 mV/47 kΩ
AUX/DVD:
	(at “Input LEVEL 1”)
	200 mV/47 kΩ
	(at “Input LEVEL 2”)
Speakers/Impedence:	4 Ω – 16 Ω

Cassette deck

Frequency response:

Normal (type I): 60 Hz—14 000 Hz

Wow and flutter: 0.15 % (WRMS)

General

Power requirement: AC 230 V		, 50 Hz
Power consumption: At operation: 50 W
	On standby:	11.8 W
		0.9 W (in Power Save)
Dimensions (approx.):
175 mm x 239.5 mm x 378 mm (W/H/D)
Mass (approx.):	7.8 kg

Tuner

FM tuning range:	87.50 MHz—108.00 MHz
AM tuning range:	531 kHz—1 710 kHz (at 9 kHz
	channel spacing)
	530 kHz—1 710 kHz (at 10 kHz
	channel spacing)

CD player

CD Capacity:	5 CDs
Dynamic range:	87 dB
Signal-to-noise ratio:	90 dB
Wow and flutter:	Immeasurable

Supplied accessories

See page 6.

Design and specifications are subject to change without notice.

MD recorder

Audio playing system:	MiniDisc digital audio system
Recording system:	Magneto-optical overwrite
	system
Reading system:	Non-contact, semiconductor laser
	pickup (λ=780 nm)
Error correction system:	CIRC (Cross Interleave Reed-
	Solomon Code)
Recording/Playback time (when using a 80-minute MD)
	SP:	80 minutes
	LP2:	160 minutes
	LP4:	320 minutes
Sampling frequency:	44.1 kHz

Audio compression system: ATRAC (Adaptive TRansform Acoustic Coding)/ATRAC3

( )

64

Image 67

JVC GVT0104-002A, CA-UXJ55MD, 0803AIMMDWJEM manual Specifications

Contents

CA-UXJ55MD Page Important for Laser Products Introduction PrecautionsAbout This Manual Contents Front Panel Location of the Buttons and ControlsFront panel Display window Display window on the front panel See pages in parentheses for details Remote Control FM antenna Connecting AntennasGetting Started Unpacking To connect speakers Connecting SpeakersAM antenna To connect an outdoor AM antenna To play the other equipment through this unit, connect Connecting External EquipmentPutting the Batteries into the Remote Control To connect external equipment To check the clock time with tones Setting the ClockBasic and Common Operations To change the clock again To turn off the unit automatically Auto Standby To turn off the clock indication Power SaveOn the remote control Turning On/Off the Key-touch Tone Reinforcing the Bass Sound Adjusting the Volume Level Bass or treble level Adjusting the TonePress BASS/TREBLE to adjust the Bass Changing the Display Brightness Press and hold ¢or 4for more than 1 second Tuning in to a StationTo change the FM reception mode Listening to FM and AM Broadcasts Tuning in to a Preset Station Presetting Stations Loading Discs When playing a CD-R or CD-RWPlaying Back Discs on the 5-CD Changer Playing Back All the Discs Continuous Play To locate a particular point in a track during play Basic Disc OperationsTo change a disc during playback of another disc To start playing a disc during playback of another disc Programing the Track Playing Order -Program Play To go to another track directly using the number buttonsTo change the information shown on the display To erase the entire program To check the program contentsPlaying at Random-Random Play To modify the program Repeat Play Prohibiting Disc Ejection-Disc Lock To stop play for a moment Playing Back MDsPlaying Back the Entire MD -Normal Play Basic MD Operations When the MD recorder stops While playing or pausingPress ¢or 4repeatedly Repeat to program other tracks you want Load an MDUntil MD Program appears On the display Press the number buttons to select the tracks Until MD Group appears on Display Playing Tracks in a Group-Group PlayUntil MD Random appears On the display Load an MD including groups Enter the characters to search for the track Repeating Tracks-Repeat PlaySearching for Tracks to Play MD Title Search Press Title Search To enter a C or c, press Available symbols are as followsPress Enter To prohibit MD ejection-MD Lock Press Tape 2 To play both sides-Reverse ModePlaying Back Tapes Playing Back a Tape Listening to External Equipment Listening to External Equipment To avoid erasing important recordings Recording on MDsBefore You Start Recording on an MD About the track marks To check the remaining recording time Precautions for performing long-hour stereo recordingStereo Long-Hour Recording Mdlp About High-Speed Recording To set LP-prefix addition mode Setting MD Recording ModesTo set group recording mode To set the recording length mode Recording mode in is still Shown on the display Press CD REC Mode to select the CD RECRecording mode Press MD REC when the selected Press MD REC Press CD REC Mode to selectTrack mark entry mode Prepare the source to record from To keep the best recording and playback sound quality Recording on TapesBefore You Start Recording on a Tape To protect your recordings Press Tape REC when Reverse modeRecording CD onto a Tape CD-Tape Synchronized Recording Recording onto a Tape Press Tape REC To record a single track of a CD/MD during play For the cassette CD Synchronized RecordingPress MD&TAPE REC For the MD Guidance-MD Group Functions Using MD Groups as a separate itemHow to make up Groups Editing MDs Introducing Group Editing Functions Forming a Group-FORM GR Track To cancel the setting, press CANCEL, then repeat fromYou can also select the track using Repeatedly until Entry GR ? Appears on the display To join the divided groups, see the Join GR function on Dividing a Group-DIVIDE GRRepeatedly until Divide GR? Appears on the display Track as the dividing Point Joining Two Groups-JOIN GR When Cannot Join appears on the display in stepRepeatedly until Join GR ? Appears on the display 4while holding Shift to select the group Moving a Group-MOVE GRRepeatedly until Move GR ? Appears on the display Press Group Skip ¢or Group Skip Repeatedly until Ungroup ? Appears on the display To cancel the setting, press CancelUngrouping Tracks-UNGROUP Dissolving All Groups-UNGR ALL Repeatedly until Erase GR ? Appears on the display Erasing Tracks in a Group-ERASE GR Introducing Track Editing Functions Dividing a Track-DIVIDE Until Join ? appears on Display Joining Two Tracks-JOINInsert an MD you want to edit into the MD Loading slot Track you want to move Position where you want To move the track toMoving a Track-MOVE Until Move ? appears on Display Track you want to erase Erasing Tracks-ERASEErasing All Tracks-ALL Erase Until ERASE? appears on Display Press or To change Title entry modeSelected title entry mode Assigning Titles to an MD Title entry Press Cancel to exit fromEnter characters Press Enter to finish the current Want to correct, by pressing Changing the TitleFollow steps 1 to 4 on Select the character you Using Recording Timer Using the TimersHow Recording Timer actually works Set the shut-off time Set the start time Until Daily Timer appears Using Daily TimerHow Daily Timer actually works Press CLOCK/TIMER repeatedly To turn off the Daily Timer after its setting is done Adjust the volume levelVolume setting appears on Display To adjust the volume level Timer Priority Using Sleep TimerHow Sleep Timer actually works To clean the disc MaintenanceStains on the unit English Hcms High-speed Copy Management System Scms Serial Copy Management SystemMD limitations Cannot REC x1 REC only CD/MD MessagesCannot REC x1 or x2 only NON Audio or DVD Troubleshooting Specifications EN, CS Victor Company of JAPAN, Limited 0803AIMMDWJEM