Turning On/Off the Key-touchTone, On the remote control

To turn off the clock indication (Power Save)

Continued

English

To turn off the clock indication (Power Save)

On the remote control ONLY:

Press DISP/CHARA while the unit is on	DISP/CHARA
standby (off).

“DISPLAY OFF” appears on the display for a while, then the clock indication goes off.

To turn on the clock indication, press DISP/CHARA again while the unit is on standby (off).

“DISPLAY ON” appears on the display for a while.

•Pressing DIMMER while the unit is on standby (off) will also activate the clock indication (see also “To check the clock time with tones” on page 9).

When you unplug the AC power cord or if a power failure occurs

The clock is reset to “0:00” right away, while the tuner preset stations will be erased in a few days.

To turn off the unit automatically (Auto Standby)

Using Auto Standby, the unit automatically turns itself off (on standby) if no sound comes in for about 3 minutes except when FM, AM, or AUX is selected as the source.

If an operation is done within this 3-minute period, Auto Standby is canceled temporarily even though no sound comes in.

•You can also turn off the unit automatically by using the Sleep Timer. (See page 58.)

Turning On the Power and Starts Playback

To turn on the unit, press STANDBY/ON	STANDBY/ON
To turn on the unit, press STANDBY/ON
.
The STANDBY/ON lamp on the unit lights
green.

On the remote control ONLY:

To activate Auto Standby, press A.STANDBY while holding

SHIFT.

SHIFT	SLEEP
	A.STANDBY

When you press one of the source selecting buttons, the unit automatically turns on (and starts playback if the source is ready).

On the remote control:	CD	MD	TAPE /AUX
			FM/AM
	6	6	23

On the unit:	DISC
	SELECT	0	0	AUX/DVD
	‹/8	‹/8	¤ ‹	FM/AM
	CD	MD	TAPE	FM/AM
	CD	MD	TAPE

“A.STANDBY ON” and the AUTO STANDBY indicator appear on the display.

•When no sound comes in, the AUTO STANDBY indicator starts flashing on the display. About 20 seconds before the unit turns itself off (on standby), “AUTO STANDBY” starts flashing on the display.

AUTO STANDBY indicator

AUTO STANDBY

•Pressing one of the eject buttons on the unit—CD10to CD50, 0 (MD eject) and 0 (TAPE eject)—also turns on the unit if the disc trays, MD, and cassette are unlocked.

•When you press FM/AM/AUX repeatedly (or AUX/DVD on the unit) to operate the external equipment, see page 27 and the manuals supplied with it.

To turn off the unit (standby), press STANDBY/ON again. The STANDBY/ON lamp on the unit lights red.

•The clock time appears on the display if you have set the built-in clock.

“0:00” will flash on the display if you have not set the built-in clock.

To set the built-in clock, see “Setting the Clock” on page 9.

•A little power is always consumed even while the unit is on standby (off).

To switch off the power supply completely, unplug the AC

power cord from the AC outlet.

To deactivate Auto Standby, press A.STANDBY again while holding SHIFT.

“A.STANDBY OFF” appears on the display for a while and the AUTO STANDBY indicator goes off.