5 Get started
Caution
•• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in sequence.
If you contact Philips, you will be asked for the model and serial number of this apparatus.The model number and serial number are on the back of the apparatus. Write the numbers here: Model No. __________________________
Serial No. ___________________________
Prepare the remote control
Note
•• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
•• Batteries contain chemical substances, so they should be disposed of properly.
To replace the remote control battery:
1
2
3
Turn on
Press .
»»The unit switches to the last selected source.
Switch to standby mode
Press to switch the unit to standby mode.
»»The backlight on the display panel becomes dim.
To switch the unit to Eco Power standby mode:
In standby mode, press and hold for 2 seconds.
»»The backlight on the display panel turns off.
12EN