JVC GVT0104-002A manual Load an MD, until “MD PROGRAM” appears, Press MD, English, on the display

Continued

English

Programing the Track Playing Order —Program Play

You can arrange the order in which the tracks play before you start playing. You can program up to 32 tracks.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 3 again.

1 Load an MD.

•If the current playing source is not “MD,” press MD 6, then 7before going to the next step.

On the remote control ONLY:

2 Press PLAY MODE repeatedly	MODE
	PLAY
until “MD PROGRAM” appears
on the display.

The PRGM indicator lights up on the display.

5 Press MD 6.		MD
	The tracks are played in the order you	6
	have programed. Program Play ends when
	all the programed tracks are played once
	(when Repeat Play is not activated).

To stop during play, press 7.

To exit from Program Play, before or after play, press PLAY MODE repeatedly so that the unit enters another play mode (Random Play, Group Play, or Normal Play).

The PRGM indicator goes off.

•Turning off the unit also cancels Program Play and changes the play mode to Normal Play. The program you have made is still stored in the memory until you erase the entire program (see below).

To check the program contents

PRGM (program) indicator

MD PRGM

•Each time you press the button, play mode changes as follows:

MD PROGRAM	MD RANDOM
(Program Play)	(Random Play)
Normal Play	MD GROUP
	(Group Play)

If a program has been stored in memory, the program is called up.

On the remote control ONLY:

Before playing, you can check the	GROUP SKIP	GROUP SKIP
program contents by pressing ¢or
4.

•¢: Shows the programed tracks in the programed order.

•4: Shows them in the reverse order.

To modify the program

On the remote control ONLY:

Before playing, you can erase the last	CANCEL
programed track by pressing CANCEL.

Each time you press the button, the last

3 Press the number buttons to select the tracks.

•For how to use the number buttons, see “To go to another track directly using the number buttons” on page 21.

1 2 3

4 5 6

7 8 9

10 0 +10

programed track is erased from the program.

To add tracks in the program before playing, simply select the track numbers you want to add by following step 3 in Program Play.

To erase the entire program, press 0(MD eject) on the unit to eject the MD.

• The program will be erased when you unplug the AC power

Last programmed
track number	Step number
MD	PRGM

Total playing time

4 Repeat step 3 to program other tracks you want.

cord or a power failure occurs.

• If you try to program a 33rd track

“MEMORY FULL” will appear on the display.

•If your entry is ignored

You are trying to program a track that does not exist on the MD (for example, selecting track 14 on an MD that only has 12 tracks).

•If the total playing time is 150 minutes or more

The total playing time on the display will not be shown. “– – : – –” will appear.

22