Using Sleep Timer
With Sleep Timer, you can fall asleep to your favorite music.
• You can set Sleep Timer when the unit is turned on.
How Sleep Timer actually works
The unit automatically turns off after the specified time length passes.
On the remote control ONLY:
1 Press SLEEP (A.STANDBY) | A.STANDBY |
| SLEEP |
repeatedly. |
|
The 
(timer) and the SLEEP indicators start flashing on the display.
“SLEEP 10” appears on the display for a while.
SLEEP 
•Each time you press the button, the time length changes as follows:
10 
20 
30 
60
Source indication 
120 
90 
(canceled)
2 Press SET or wait for about 5 | SET |
| |
seconds. |
|
The 
(timer) and the SLEEP indicators stop flashing and remain lit.
The display dims automatically.
To check the remaining time until the
To change the
To cancel the setting, press SLEEP repeatedly until the 
(timer) and SLEEP indicators go off from the display.
Sleep Timer will be also canceled in the following cases:
•When you turn off the unit.
•When you operate other timer settings.
•When you adjust the clock.
English
To sleep with the Sleep Timer and wake up with the Daily Timer
The unit turns off (on standby) when the
1Set the Daily Timer as explained on pages 56 and 57.
2Start playing back any source you want to listen to before sleep.
3Set the Sleep Timer.
Timer Priority
Since each timer can be set separately, you may wonder what happens if the setting for these timers overlaps.
Below is the example of timer priority.
A timer with the earlier start time has priority.
If Recording Timer is set to come on while Daily Timer is operating, Recording Timer will not work.
6:00 6:30 7:00 7:30
Daily Timer
Recording Timer
will not start
Sleep Timer always has priority.
If Sleep Timer is set to come on while Recording Timer is operating, Recording Timer will be canceled when the shut- off time comes.
6:00 6:30 7:00 7:30
Sleep Timer
Recording Timer
canceled
Sleep timer and Auto Standby (see page 10) can be used at the same time.
58
