JVC UX-A70MDR manual Setting the Clock, Using Recording Timer, How Recording Timer actually works

Continued

There are three timers available — Recording Timer, Daily Timer, and Sleep Timer.

Before using these timers, you need to set the built-in clock.

Setting the Clock

You can set the clock whether the unit is turned on or in standby mode.

1 Press CLOCK/TIMER.

“0:00” appears in the main display with the hour digit flashing.

2 Press ¢or 4repeatedly to adjust the hour.

•When press and hold the button, the hour digit changes continuously.

3 Press SET to set the hour.

The minute digit starts flashing.

Ex. When pressing SET after

adjusting the hour to 10.

•If you want to correct the hour again, press

CANCEL.

The hour digit starts flashing again.

4 Press ¢or 4repeatedly to adjust the minute.

•When press and hold the button, the minute digit changes continuously.

5 Press SET to finish setting the clock.

The built-in clock starts.

To adjust the clock again

Press CLOCK/TIMER repeatedly in step 1 until the clock time appears in the main display, then follow the procedure above.

If there is a power failure

The clock loses the setting and is reset to “0:00.” You need to set the clock again.

Using Recording Timer

With Recording Timer, you can make an unattended recording.

•You can set Recording Timer whether the unit is turned on or in the standby mode.

•To correct a mis-entry any time during the setting process, press CANCEL.

How Recording Timer actually works

The unit automatically turns on, muting the volume, and starts recording on the MD when the timer-on time comes. Then, when the timer-off time comes, the unit automatically turns off (stands by).

Recording Timer works only once, but the timer settings remain stored in memory until you reset them or unplug the AC power cord.

1 Press CLOCK/TIMER repeatedly until Recording ON time appears in the main display.

The timer ( ) indicator lights, and the MD REC indicator starts flashing on the display.

The hour digit of the timer-on time starts flashing.

•Each time you press the button, the timer mode change as follows:

No indication

(canceled) REC ON 0:00

Clock setting ON 0:00 DAILY

(clock time)

2 Set the timer-on time.

1)Press ¢or 4repeatedly to adjust the hour.

2)Press SET.

The minute digit starts flashing.

3)Press ¢or 4repeatedly to adjust the minute.

4)Press SET.

The hour digit of the timer-off time starts flashing.

– 42 –