Adjusting the Volume
You can adjust the volume level only while the unit is turned on.
To decrease the volume, press VOLUME
(VOL. 40)
(VOL. 0)
•When press and hold each button, you can change the volume level continuously.
Reinforcing the Bass Sound
The richness and fullness of the bass sound is clearly maintained regardless of how low you set the volume — Active Hyper Bass PRO.
• You can use this effect only for playback.
To get the effect, press AHB PRO.
“BASS ON” appears in the main display and the BASS indicator lights on the display.
To cancel the effect, press AHB PRO again.
“BASS OFF” appears in the main display and the BASS indicator goes off from the display.
For private listening
Connect a pair of headphones to the PHONES jack. No sound comes out of the speakers. Be sure to turn down the volume before connecting or putting on the headphones.
If “CAN NOT LISTEN” appears in the main display
During
DO NOT turn off (on standby) the unit with the volume set to an extremely high level; otherwise, the sudden blast of sound can damage your hearing, speakers and/or headphones when you turn on the unit or start playing any source.
REMEMBER you cannot adjust the volume level while the unit is in standby mode.
To turn down the volume level temporarily
On the remote control ONLY:
Press FADE MUTING.
The unit automatically decreases the volume level to “VOL.MIN” at once.
To restore the sound, press FADE MUTING again.
Selecting the Sound Modes
You can select one of the 3 preset sound modes. The sound modes can be applied only to playback sounds, and cannot be used for recording.
On the remote control ONLY:
To select the sound modes, press SOUND MODE repeatedly until the sound mode you want appears in the main display.
The SOUND indicator also lights on the display.
•Each time you press the button, the sound mode changes as follows:
FLAT 
ROCK 
POP 
CLASSIC
(Canceled)
ROCK:Boosts low and high frequency. Good for acoustic music.
POP:Good for vocal music or voice.
CLASSIC: Good for classical music.
FLAT:Cancels the sound mode.
To check the sound mode currently selected, press SOUND MODE once while the SOUND indicator is lit. The currently selected sound mode will appear in the main display.
– 12 –
