3 Press SELECT
The PTY code previously selected starts flashing in the main display.
Ex. “News” is selected.
•Each time you press the button, the PTY codes change as follows (refer also to the list on page 19):
News ÒAffairs ÒInfo ÒSport Ò Educate ÒDrama ÒCulture Ò
Science ÒVaried ÒPop M ÒRock M Ò Easy M Ò Light M ÒClassics Ò
Other M ÒWeather ÒFinance ÒChildren Ò Social ÒReligion ÒPhone In ÒTravel Ò Leisure ÒJazz ÒCountry ÒNation M Ò Oldies ÒFolk M ÒDocument ÒTEST Ò Alarm! Ò(back to the beginning)
4 Press PTY again.
While searching, the selected PTY code and “SEARCH” appear alternately in the main display.
Ex. When “News” is selected as the PTY code.
The unit searches 30 preset FM stations, stops when it finds the one you have selected, and tunes in that station.
5 Release your finger from RDS CONTROL.
To continue searching after the first stop:
Press PTY again when the indications on the display are flashing. If no program is found, “NOT FOUND” appears in the main display and the unit returns to the last received station.
To stop searching any time during the process:
Press PTY when searching.
Switching to a Program Type of Your Choice Temporarily
The EON function allows the unit to switch temporarily to a broadcast program of your choice (TA, News, or Info) from a different station except when you are listening to a non- RDS station — some FM stations and AM (MW/LW) stations.
•The EON indicator lights while receiving a station with the EON code.
•EON function is applicable only to preset stations.
On the remote control ONLY:
1 While listening to an FM station, press and hold RDS CONTROL until you finish the following procedure.
2 Press EON.
“EON SELECT” appears in the main display.
3 Press SELECT
The name of the selected EON data type starts flashing in the main display, and the indicator appears on the display.
•Each time you press SELECT
OFF =TA = News = Info = (back to the beginning)
TA: | Traffic announcement |
News: | News |
Info: | Programs the purpose of which is to impart |
| advice in the widest sense. |
OFF: | EON function is canceled. |
4 Press EON again to set the EON data type.
5 Release your finger from RDS CONTROL.
To cancel the EON function, select OFF in step 3 above.
•If you cancel the EON function while receiving a program selected by the EON function, the unit goes back to the previously tuned station.
•You can also cancel the EON function by selecting another source.
