3 Press SET.

“– – – + 1 ?” appears in the main display.

4 Press ¢or 4to select the two adjacent tracks you want to join.

You can also press the number button(s) to directly select the track you want to join.

Ex. When you want to join tracks 1 and 2.

5 Press SET.

“PUSH ENTER” appears in the main display.

If you have selected wrong tracks, press CANCEL, then select the correct tracks.

6 Press ENTER to finish the editing procedure.

“EDITING” appears for a while, then “UTOCwriting” flashes while the editing you have made is being recorded on the MD.

To divide the joined tracks, see the DIVIDE function.

If “CANNOT JOIN” appears in step 5

You cannot join the following tracks.

Tracks recorded using different recording length modes (SP, LP2, LP4). (See page 30)

Digital-recording tracks and analog-recording tracks.

Tracks recorded using monaural long recording method (not possible on this unit) and stereo-recording tracks.

MOVE Function

This function allows you to move a track to the position you prefer. It is useful to change the order of the tracks as you like.

To stop any time during editing process, press

TITLE/EDIT.

1 Insert an MD you want to edit into the MD loading slot.

2 Press TITLE/EDIT repeatedly until “MOVE ?” appears in the main display.

The source is changed to “MD.”

Each time you press TITLE/EDIT, the edit mode changes as follows:

DISC TITLE? DIVIDE ? JOIN ? MOVE ?

Playback mode

 

ALL ERASE?

 

ERASE?

(canceled)

 

 

 

 

 

 

3 Press SET.

+ 1 ?” appears in the main display.

4 Select the track you want to move.

1)Press ¢or 4.

• You can also press the number button(s) directly.

Ex. When you want to move track 2.

2) Press SET.

5 Select the position where you want to move the track to.

1)Press ¢or 4.

• You can also press the number button(s) directly.

EX. When you want to move track 2 to

the position of track 7.

2)Press SET.

“PUSH ENTER” appears in the main display.

If you have selected wrong tracks, press CANCEL, then select the correct tracks.

6 Press ENTER to finish the editing procedure.

“EDITING” appears for a while, then “UTOCwriting” flashes while the editing you have made is being recorded on the MD.

– 36 –

Page 40
Image 40
JVC UX-A70MDR manual Move Function, + 1 ? appears in the main display, To divide the joined tracks, see the Divide function