JVC CA-UXJ55MD CDSynchronized Recording, Recording CD onto an MD and a Tape, Press MD&TAPE REC

Recording CD onto an MD and a Tape

—CD Synchronized Recording

With this recording method, you can start and stop CD play, MD and tape recordings at the same time.

English

To stop recording, press 7.

“WRITING” flashes on the display for a while.

To eject the MD or tape, press 7 to stop the recording, then press the corresponding eject button.

1 Load discs into the 5-CD changer.

•If the current playing source is not “CD,” press CD 6, then 7 before going to the next step.

•You can make a program (see page 17) or select Random Play (see page 18) if you want. = Go to step 3.

On the remote control ONLY:

2 Press DISC UP or DISC DOWN to select the disc you want to record, then 7 before going to the next step.

DISC UP

To record a single track during play or pause

On the remote control ONLY:

While playing back or pausing a track you	MD&TAPE
want to record, press MD&TAPE REC.	REC

The playback of the track is stopped, and the

same track starts playing from the beginning again. This time, the MD recorder and cassette deck start recording the track.

•After the track is recorded, both playback and recording stop automatically.

DISC DOWN

3 Insert a recordable MD into the MD loading

slot and put a recordable cassette into the cassette loading slot.

For the MD:

Set the MD recording length mode, “LP:”-prefix addition mode, and group recording mode (see “Setting MD Recording Modes” on page 30).

•Set the MD recording speed to “x1.”

For the cassette:

Press REV.MODE to select Reverse Mode as necessary.

4 Press MD&TAPE REC.	REC
	MD&TAPE
CD play and recording start.

•When you select a track by pressing ¢ or 4 before pressing MD&TAPE REC, recording starts from the selected track (except when Program Play is selected).

The REC (MD recording) and REC (tape recording) indicators start flashing on the display.

MD and tape			Remaining
recording indicators			playing time
C D	MD SP	TAPE
1 2 3 4 5	REC	REC
	x 1

The track number	MD remaining
on the disc currently	recording time
being recorded

When CD player stops, MD recorder and the cassette deck stop automatically.

To change the information shown on the display

On the remote control ONLY:

Press DISP/CHARA. DISP/CHARA

• Each time you press the button, the recording indications, the current track numbers of both the disc and the MD, and the clock indication appear in sequence on the display.

•When recording from a CD-R/RW

You cannot make a digital recording from a digital-copied CD-R/RW on an MD. “SCMS CANNOT COPY” appears on the display and an analog recording starts (see page 63).

•When recording on an MD and a tape at the same time A 4-second blank before each track is not made on the tape.

36