JVC CA-UXJ55MD Listening to External Equipment, To adjust the Audio Input Level, display, English

Models: 0803AIMMDWJEM GVT0104-002A CA-UXJ55MD

1 68
Download 68 pages 5.14 Kb
Page 30
Image 30
Listening to External Equipment

English

Listening to External Equipment

Listening to External Equipment

You can listen to external equipment connected to the AUX/ DVD jacks on the rear of the unit.

First make sure that the external equipment is properly connected as follows (see also “Connecting External Equipment” on page 8):

DO NOT connect other equipment while the power is on.

4 Adjust the volume level to your desired 5 Apply sound effects, if you wish. listening level.

5 Apply sound effects, if you wish.

• For how to apply sound effects, see pages 11 and 12.

To adjust the Audio Input Level

If the sound from the component connected to the AUX/DVD jacks is too loud or is not loud enough when changing from another source to “AUX,” you can change the audio input level through the AUX/DVD jacks (without

To AUX/DVD jacks

To audio output

AUX/DVD

LEFT

External equipment

changing the volume level).

On the remote control ONLY:

 

Press and hold SET for more than 2 seconds

SET

while the source is “AUX.”

 

• Each time you press and hold the button,

the audio input level alternates between

“LEVEL 1” and “LEVEL 2.”

1 On the remote control:

 

Press FM/AM/AUX repeatedly

/AUX

 

FM/AM

until “AUX” appears on the

 

display.

 

Each time you press the button, the source changes as follows:

LEVEL 1: Select this when the sound is too loud (initial

setting).

LEVEL 2: Select this when the sound is not loud enough.

FM To adjust the Audio Input Level AM Press and hold SET for more than 2 seconds AUX
On the unit:

Press AUX/DVD.

• “AUX” appears on the display.

AUX/DVD

 

 

FM/AM

To change the information shown on the display

On the remote control ONLY:

Press DISP/CHARA.

DISP/CHARA

 

Each time you press the button, the information on the display alternates between the source indication and the clock indication.

If an MD is inserted, the MD remaining recording time (“REC REMAIN”) is shown before the clock indication.

2 Turn down the volume level to “VOLUME 0.”

VOLUME +

VOLUME

(On the remote control)

(On the unit)

3 Start playing the external equipment.

For operation of the external equipment, refer to the manuals supplied with it.

27

Page 30
Image 30
JVC CA-UXJ55MD Listening to External Equipment, To adjust the Audio Input Level, Apply sound effects, if you wish, display