JVC CA-UXJ55MD Playing at Random-RandomPlay, To check the program contents, To modify the program

Continued

English

If Program Play is still activated, you cannot eject the discs.

To open disc trays (eject discs), before or after play, press PLAY MODE once or twice so that the unit enters another play mode (Random Play or Continuous Play) before pressing the disc eject buttons (CD10 to CD50).

To check the program contents

•If your entry is ignored

You are trying to program a track from an empty tray, or a track number that does not exist on the disc.

•If “NO READ” appears on the display

You are selecting the disc that the unit has not yet read. Press DISC UP

or DISC DOWN to select the disc so that its disc information is shown on the display.

•If the total playing time is 100 minutes or more

The total playing time on the display will not be shown. “– – : – –” will appear.

On the remote control ONLY:

Before playing, you can check the GROUP SKIP GROUP SKIP

program contents by pressing ¢ or

4.

•¢: Shows the programed tracks in the programed order.

•4: Shows them in the reverse order.

•Pressing 4 first time after you have programed shows the first track in the program.

To modify the program

On the remote control ONLY:

Before playing, you can erase the last	CANCEL
programed track by pressing CANCEL.

Each time you press the button, the last programed track is erased from the program.

To add tracks to the program before playing, simply select

the disc numbers and track numbers you want to add by following steps 3 and 4 in Program Play.

To erase the entire program

1 Press 7 to stop playback.

2 Press PLAY MODE once or twice PLAY

MODE

so that the unit enters another playback mode (Random Play or Continuous Play).

Playing at Random—Random Play

The tracks of all loaded discs will be played at random.

•To use Repeat Play (see page 19), press REPEAT after starting Random Play.

1 Load discs into the 5-CD changer.

•If the current playing source is not “CD,” press CD 6, then 7 before going to the next step.

On the remote control ONLY:

2 Press PLAY MODE repeatedly		MODE
		PLAY
until “CD RANDOM” appears on
the display.
The RANDOM indicator also lights up on the
display.
	RANDOM indicator
C D
1 2 3 4 5	RANDOM

•Each time you press the button, play mode changes as follows:

		CD PROGRAM		CD RANDOM
		(Program Play)		(Random Play)
			Continuous Play
3 Press CD 6.					CD
	The tracks are played at random.				6
	Random Play ends when all the tracks are
	played once (when Repeat Play is not activated).

3 Press disc eject buttons (CD10 to CD50) on the unit to eject all the discs used for making the program.

CD1 0 CD2 0 CD3 0 CD4 0 CD5 0

The program will also be erased, when you unplug the AC power cord or a power failure occurs.

•If you try to program a 33rd track “MEMORY FULL” will appear on the display.

To stop during play, press 7.

• Opening a disc tray also stops and cancels Random Play.

To skip the current playing track, press ¢.

To skip back to the beginning of the current track, press 4.

• You cannot go back to the previous tracks.

To exit from Random Play, before or after play, press PLAY MODE once or twice so that the unit enters another play mode (Continuous Play or Program Play).

The RANDOM indicator goes off.

•Turning off the unit also cancels Random Play and changes play mode to Continuous Play.

18