English
In the following examples of group editing, the process is explained from the very
Forming a Group—FORM GR
This function allows you to form a group from a series of tracks which do not belong to the other groups. You can form a group from a single track.
Once a new group is formed, the other groups are renumbered.
•You can form up to 99 groups on a single MD.
•To stop any time during the editing process below before step 8, press GROUP TITLE/EDIT.
1 Insert an MD you want to edit into the MD 
loading slot.
On the remote control ONLY:
2 Press GROUP TITLE/EDIT | /EDIT |
| GROUP TITLE |
repeatedly until “FORM GR ?” |
|
appears on the display. |
|
• If you want to stop this editing process, press CANCEL.
3 Press SET. | SET |
|
•During playback:
The currently playing track number starts flashing.
4 Press ¢or 4to select | GROUP SKIP | GROUP SKIP |
the first track of a new |
|
|
group. |
|
|
•You can also select the track using
the number buttons. In this case, the selected track starts playback repeatedly.
Ex.: When track 3 is selected.
5 Press SET. | SET |
• If the track selected as the first track belongs to another group, “GROUP TRACK” appears on the display.
Select another track again (repeat step 4 ).
•If you want to form a group from the selected track only, go to step 7.
•To cancel the setting, press CANCEL, then repeat from step 4.
6 Press ¢or 4to select | GROUP SKIP | GROUP SKIP |
| ||
the last track of the new |
|
|
group. |
|
|
•You can also select the track
using the number buttons. In this case, the selected track starts playback repeatedly.
Ex.: When track 5 is selected.
7 Press SET. | SET |
|
•If the last selected track belongs to another group, “GROUP TRACK” appears on the display. Select another track again (repeat step 6 ).
•To cancel the setting, press CANCEL, then repeat from step 4.
8 Press ENTER. | ENTER |
|
“EDITING” appears on the display. Then “WRITING” and the REC (MD recording) indicator flash while the editing you have
made is being recorded on the MD and playback stops.
To dissolve the group, see the UNGROUP function on page 44.
When “CANNOT FORM!” appears on the display in step 7
You are trying to form a new group which includes another group between the first and the last track. In this case, dissolve the previous group and form a new one again.
39
