JVC 0803AIMMDWJEM Dividing a Group-DIVIDEGR, repeatedly until “DIVIDE GR?”, Press ¢or 4to select

English

Dividing a Group—DIVIDE GR

This function allows you to divide one group into two separate groups.

You cannot divide the group containing only a single track. When the original group has a title, two separate groups are reassigned the same title as the original group.

Once a new group is divided, the other groups are renumbered.

•To stop any time during the editing process below before step 7, press GROUP TITLE/EDIT.

1 Insert an MD you want to edit into the MD loading slot.

On the remote control ONLY:

2 Press GROUP TITLE/EDIT	/EDIT
	GROUP TITLE
repeatedly until “DIVIDE GR?”
appears on the display.

• If you want to stop this editing process, press CANCEL.

3 Press SET. SET

•If the loaded MD has no group, you cannot go to the following steps.

•During playback:

The current playing track number and its group number will appear. If the track does not belong to any group, the group number will be indicated as “– –.”

4 Press GROUP SKIP ¢or GROUP SKIP

4while holding SHIFT to select the group you want to divide.

GROUP SKIP GROUP SKIP

SHIFT

The first track of the selected group

5 Press ¢or 4to select	GROUP SKIP	GROUP SKIP
the track as the dividing
point.

The track selected in this step will be the first track in the divided group.

•You can also select the track using the number buttons. In this case, the selected track starts playback repeatedly.

Ex.: When track 18 is selected.

•You cannot select the first track in a group or an ungrouped track as a dividing point.

6 Press SET. SET

•To cancel the setting, press CANCEL, then repeat from step 4.

7 Press ENTER. ENTER

“EDITING” appears on the display. Then “WRITING” and the REC (MD recording) indicator flash while the editing you have

made is being recorded on the MD and playback stops.

To join the divided groups, see the JOIN GR function on

page 42.

Ex.: When group 2 is selected.

41