Basic Operation Keystone Correction | Christie Digital Systems LX605

Basic Operation

Keystone Correction

If a projected picture still has keystone distortion after pressing the AUTO PC button on the remote control, correct the image manually as follows:

Press the KEYSTONE button on the remote control to switch the Standard (for Vertical/Horizontal) /Corner correction adjustment. The Standard or Corner correction adjustment dialog box appears. Use the Point ▲▼◄► buttons to correct the Standard or Corner distortion. The Standard or Corner correction adjustment can be stored (see pages 44, 50).

Remote Control

POINT ▲▼◄►buttons

Standard

KEYSTONE button

Reduce the lower width	Reduce the upper width
with the Point ▼ button.	with the Point ▲ button.

Reduce the right part	Reduce the left part with
with Point ► button.	Point ◄ button.

Corner correction

Press the KEYSTONE button on the remote control to switch Corner correction adjustment, press the SELECT button on the remote control to select the corner you want to adjust.

Reduce the top left corner part	Reduce the top right corner part
with the Point ►▼ buttons.	with the Point ◄▼ buttons.

Note:

•The white arrows indicate that there is no correction.

•A red arrow indicates the direction of correction.

•An arrow disappears at the maximum correction.

•If you press and hold the KEYSTONE button for more than 3 seconds while the Standard or Corner correction dialog box is being displayed, the Standard or Corner correction adjustment will be released.

•The Corner pattern can be set to Off, Red, White or Blue in the Corner pattern function. See "Keystone" on pages 44, 50.

•The adjustable range is limited depending on the input signal.

•Standard and Corner correction functions cannot be adjusted at the same time. If one of the fuctions is adjusted, and then the other one will be reset automatically.

Keystone

Press the SELECT button

The top left corner adjustment as an example:

Keystone	Press the Point ▼
	button
	Keystone
	Keystone
	Press the SELECT
	button

	Press the SELECT
	button
Keystone	button	Keystone

Reduce the bottom left corner	Reduce the bottom right corner
part with the Point ►▲ buttons.	part with the Point ◄▲ buttons.

Keystion

Press the Point ► button

LX505/LX605 User Manual	31
002-000232-01 Rev.1 (12-2009)

Christie Digital Systems LX605 Basic Operation Keystone Correction, Standard, Corner correction

Models: LX605

Basic Operation

Standard

Corner correction