Setting

This projector has a Setting menu that allows you to set up the other various functions described below.

1Press the MENU button to display the On-Screen Menu. Press the Point ▲▼ buttons to select Setting and press the Point ► or the SELECT button to access the submenu items.

2Use the Point ▲▼ buttons to select the desired item and then press the Point ► or the SELECT button to access the selected item.

3Use the Point ▲▼ buttons to select the desired item and then press the SELECT button.

Language

The language used in the On-Screen Menu is available in English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Russian, Chinese, Korean and Japanese.

Menu position

This function is used to change the position of the On-Screen Menu. Select Menu position and press the SELECT button. The Menu position screen appears.

The Menu position changes each time you press the SELECT button as follows.

the top left the top right the center the bottom left the bottom right the top left .....

Setting Menu

Language	English
Menu position
Input button	Mode 1
Display	On
Background	Blue
Logo
Lamp control
Filter control
Fan control	Normal
Simple mode	On
Remote control	Mode 1
RC sensor	Back
Power management	Off

Language

	Language		English
	Menu position
	Input button		Mode 1
	Display		On
	Background		Blue
	Logo
	Lamp control
	Filter control
	Fan control		Normal
	HDMISimplesetupmode		On
	TerRemoteinalcontrol		ComputerMode 1 2
	PointRC sensor		DotBack
	StandbyPower managementmode		EcoOff

Input button

This function detects the input signal automatically. When a signal is found, the search will stop. Use the Point ▲▼ buttons to select one of the following options.

Mode 1......Input search will not work.

Mode 2......Input search works under the following situation:

–When pressing the INPUT button on the side control. or the remote control.

Mode 3......Input search works under the following situation:

–When turning on the projector by pressing the ON/ STAND-BY button on the side control or pressing the ON button on the remote control.

–When pressing the INPUT button on the remote control or on the side control.

- When no signal is detected.

Note:

•While Input button is set to Mode 3, and no signal is detected, if the Shutter or Freeze function is active, cancel it to activate the Input search.

•While Input button is set to Mode 1 or Mode 2, the status of Input and Lamp are displayed every time the signal is switched.

•Only the last selected input source can be detected.

•If the INPUT, INPUT 1, INPUT 2, INPUT 3, ON / STAND- BY or MENU button is pressed during Input search is in progress, Input search will stop and go back to the previous input signal.

LX505/LX605 User Manual	51
002-000232-01 Rev.1 (12-2009)

Christie Digital Systems LX605 manual Setting

Models: LX605

Setting

Setting