Christie Digital Systems LX605 manual Setting, Shutter, Video delay control, Video delay On

Setting

Shutter

Shutter function is available to block out light to the screen, so that			Shutter
the screen can be used for the other presenters.
	Protection
	Prohibit the shutter operation from the remote control and the
	projector's side control.
	Remote control	. .Selecting On prohibits the shutter
		operation from the remote control.
	Projector . . . .	Selecting On prohibits the shutter
		operation from the side control.

It is possible to prohibit the shutter operation from both of the remote control and the side control.

Management

The Shutter Management function turns off the projection lamp when the projector is left with the shutter closed and the set time has passed away. The count-down time can be set between 5 and 180 minutes. When the count-down time has elapsed, the shutter will be opened up automatically and the lamp will be turned off to cool itself down. The SHUTTER indicator is blinking blue during this cooling-off period. When the lamp has been fully cooled down, the POWER indicator turns green lighting and the SHUTTER indicator keeps blinking. Should the ON / STAND-BY button be pressed in this condition, the projection lamp will be turned on and the SHUTTER indicator turns off.

￿Note:

The Shutter Management function cannot be halted.

Standby mode	Network
On start	On
Pointer	Dot
P-Timer
Security
Shutter
Video delay control	Off
Filter counter
Test pattern
Factory default

Shutter
	Protection
	Projector		Off
	Remote control		Off
	Management	180 Min

Video delay control

When you want to make a digital processing of a projected image faster, set this function.

Use the Point ▲▼ buttons, select an item of Off/Low/Mid/High. Digital processing speed becomes fast by order of Low → Mid → High. High is the fastest.

￿Note:

-The following functions are not available respectively when Video delay
control is set to Low/Mid/High.
Low ... Keystone can not be selected.
Mid ... Progressive and Noise reduction can not be selected.	Fig.1
High ... Keystone, Progressive and Noise reduction can not
be selected.
-When Video delay control function is set to Low or High and press the
KEYSTION button on the remote control, Fig.1 will be dispalyed on the		Video delay : On
bottom left screen.

LX505/LX605 User Manual	61
002-000232-01 Rev.1 (12-2009)